YTM-III Hipot Test Sets for Insulation Gloves / Boots / Rods (Manual)

YTM-III Hipot Test Sets for Insulation Gloves / Boots / Rods  (Manual)

Classification: Partical Discharge/AC DC hipot test set

Reference standard: GB17622-1998,DL/T976-2005

Verification:  View the certificate

Instructions:  DOC Instructions

  PDF Instructions

Tel: 027-87207771 87207772 87207773 87188862

Verification certificate
Product introduction

YTM-III insulated boots (gloves) withstand voltage testing device (manual operation) using a separated design boots,with compact size, light weight,six tested objects with over-current protective individual controlled, with high precision indication and advanced control mode.NANR Electrical according to the insulated boots (gloves) testing requirements, and follows the advice of user, design and produce the product. The product is an effective solution for the former non-standard tests, improve work efficiency, and protect working safety, such an ideal insulated boots (gloves) special equipment.

Alternative name

Insulated gloves & boots withstand voltage testing equipment, protective equipment insulation testbed, insulated boots & gloves withstand tester, assistive insulated tools testing device, insulated gloves & boots testing device, charged protective equipment insulation testers, insulated boots & gloves tester, insulated boots & gloves testing machine

The Characteristics of the products

1, High voltage, leakage current, withstand voltage time status information and other data will be displayed LCD screen at the same time, with backlight, clear reading and is intuitive.
2, English interface, status notification, reminders, guided working, the operation is simple and straightforward.
3, Light touch panel keys operation, all functions can be set through the keys, to improve product safety and reliability.
4, Full digital calibration, eliminating the old potentiometer adjustment method, the scene extremely easy to use.
5, Adopt hardware and software anti-jamming technology, with stable performance and strong anti-interference.

The parameters of the products

(1). Voltage: 0 ~ 30KV or 0 ~ 50KV

(2). Capacity: 0 ~ 3KVA or 0 ~ 5KVA

(3). HV protection current :0 ~ 30mA can be adjusted

(4). Dimension:

      Control box: 450mm * 500mm * 650mm

      Sink: 820mm * 800mm * 700 mm

(5). Weight:

          Control box: 28kg

          Sink: 22kg

(6). Control box and sink are equipped with a 3-inch walking wheel



Power supply: AC110V/115V/120V/127V/220V/230V/240V optional
Input frequency: 50Hz/60Hz optional
Note: The users can select the corresponding power which based on their local supply voltage and frequency, and we will confirm it before the delivery (or inform us that the goods will be used in which country advance)

Product information

Maintenance
1, After YTM-III insulated boots (gloves) withstand voltage testing device (manual operation )  used, please empty the water tank.
2, If without long-term use should be kept outside the sink dry, the electrode rod and insulation rod must free of moisture.
3, Should measure the insulated resistance of insulating rod before using, if necessary, use the high-voltage test the withstand voltage value must not less than 20KV