NRBLC-III Zinc Oxide Arrestor Tester

NRBLC-III Zinc Oxide Arrestor Tester

Classification: Cable/Circuit/Lighting Arrester Test Device

Reference standard:

Verification:  View the certificate

Instructions:  DOC Instructions

  PDF Instructions

Tel: 027-87207771 87207772 87207773 87188862

Verification certificate
Product introduction

NRBLC-III Zinc Oxide Arrestor Testeris a special instrument for detecting electrical properties of zinc oxide surge arresters. The instrument is suitable for charging or power outage detection of various voltage levels of zinc oxide surge arresters, timely detection of equipment internal insulation damp and valve aging and other dangerous defects.

NRBLC-III Zinc Oxide Arrestor Tester is simple and easy to operate, the entire measuring process is controlled by microcontrollers to measure the full current, resistive current and its harmonics, frequency reference voltage and its harmonics, active power and phase difference of zinc oxide surge arrester, a large screen can display the real waveform of voltage and current.

The instrument is adopt with digital waveform analysis techniques, used harmonic analysis and digital filtering software such as anti-jamming method to make the test result accurate and stable, it not only can accurately analysis the fundamental and the content of 3 to 7 times of harmonic, but also can overcome the influence of the interphase interference to rightly measuring the resistive current of edge phase arrester.

The instrument is equipped with high-speed printer panel, rechargeable battery, it is very convenient to test in the field. It uses a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current, ensure the data reliability and security.

Alternative name
Zinc oxide arrester tester, intelligent arrester tester, anti-interference characteristics of zinc oxide arrester tester, leakage current arrester resistive detector, zinc oxide arrester tester charged, zinc oxide surge arresters without gaps for ac tester, zinc oxide arrester tester
The Characteristics of the products

1.A large-screen LCD display, easy to operate.

2.Adopting high-precision sampling, processing circuitry, advanced Fourier harmonic analysis techniques to ensure the data is more reliable.

3.Using a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current, ensure the data reliability and security.

4.Support wireless synchronization voltage sampling way.

5.With the function of fundamental peak output of resistive current, edge phase correction and so on.

6.The instrument is equipped with a rechargeable battery, calendar clock, mini printer, it can store 120 sets of measurement data;

The parameters of the products

(1) Measurement range of full current: 0-10mA RMS, 50Hz/ 60Hz; Accuracy: ± (reading × 5% + 5 μA)

(2) Measurement accuracy of fundamental resistive current  (secondary law without interphase interference): ± (reading × 5% +5 μA)

(3) Accuracy of current harmonics: ± (reading × 10% +10 μA)

(4) Input range of reference voltage: 25V ~ 250V RMS, total harmonic content < 30%, 50Hz/ 60Hz

(5) Measurement accuracy of reference voltage: ± (reading × 5% +0.5 V)

(6) Measurement accuracy of voltage harmonics: ± (reading × 10%)

(7) The angle of fundamental current and voltage Φ: 0 ~ 360°

(8) Battery working time: Host 6 hours

     Charging power: 220V ± 10% 50Hz/ 60Hz Charging time: 5 hours

(9) Dimensions: 325mm × 280mm × 140mm
(10) Weight: 3.5Kg (do not include cable)

(11) Operating environment: Temperature: -10-50 ℃ Relative humidity: < 90%

Power supply: AC110V/115V/120V/127V/220V/230V/240V optional
Input frequency: 50Hz/60Hz optional
Note: The users can select the corresponding power which based on their local supply voltage and frequency, and we will confirm it before the delivery (or inform us that the goods will be used in which country advance)

Related products
Product information
1, Taken from the PT secondary voltage reference, you should carefully check the wiring to avoid PT secondary circuit.
2, The voltage signal input line and the current signal input line must not be reversed, if the current signal input line connected to PT3, test transformer secondary side or measuring end, it may burn the instrument.
3, Where the input voltage and input current circumstances, do not plug the measuring line, so as not to burn the instrument.
4, The instrument is damaged, stop using it immediately and notify the Company and do not repair yourself out of the box. When the instrument is not working properly, first check the power fuse is blown. After replacement of the same model can continue the insurance experiment. If the problem is more complex, please contact me directly.
5, The instrument must not be placed in humid and high temperature environments.
6, The instrument is not used as a long time (more than three months), the battery will run out of damage, so each interval of 3 months should be given to the instrument one charge (6 hours or more), in order to ensure that the instrument can be used normally. Charging steps: Turn the power switch, plug in 220V power until the battery is indicating below the LCD screen 90% or more.